Wash-In Rain Shield Re-proofer - 300ml

SKU Code: 20813
$5.77 ($14.99)

Shredding in the rain? Grab our new Wash-In Rain Shield Re-Proofer. It’s an easy-to-use wash-in treatment designed to restore factory levels of performance on all waterproof and breathable fabrics. The cutting-edge DWR treatment creates a tough barrier to keep your technical garments weatherproof, without impacting their breathability. Read more

  • extends garment life
  • repels mud & grime
  • Free US Shipping over $50
    Free US Shipping over $50
  • Pay in 4 with Shop Pay
    Pay in 4 with Shop Pay
  • Description

    Shredding in the rain? Grab our new Wash-In Rain Shield Re-Proofer. It’s an easy-to-use wash-in treatment designed to restore factory levels of performance on all waterproof and breathable fabrics. The cutting-edge DWR treatment creates a tough barrier to keep your technical garments weatherproof, without impacting their breathability. It also helps to protect against mud and ground-in stains. And the best bit? It’s safe for the environment, as it’s water-based and doesn't contain PFCs!

    Our state-of-the-art formula gives unrivalled protection within 24 hours of treatment. After application, water will bead and roll off, so you’re protected to go and get rad in the harshest of conditions.

  • FEATURES

    • Extends life and performance of garments
    • Can be used on any technical or waterproof/water repellent fabric including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing
    • Helps to repel wet mud and grime and protects against ground-in stains
    • Will not impact breathability of garments
    • PFC – Free
    • Not harmful for the environment, or to you
    • Can be used on any technical or waterproof/water repellent fabric including Gore-Tex®, Polartec®, Pertex®, eVent®, softshell and hardshell clothing 
  • HOW TO

    1. We recommend cleaning your technical apparel with our Technical Wash before treating with Wash-In Rain Sheild Re-Proofer for the best results. 
    2. Shake bottle well to activate the formula.
    3. For best results we recommend reproofing garments separately. 
    4. Use 20 x 5ml caps per large item, or two smaller items. Use 5 x capfuls if hand washing.
    5. Pour the product directly into the detergent drawer of your washing machine
    6. Wash on a full cycle at 30°C/86°F or according to the care label instructions.
    7. Air-dry by hanging up and leave to dry overnight before wearing the garment in wet conditions again. Or tumble dry if the care label inside your garment permits.

    TOP TIP – For an even more durable treatment, you can apply our Rain Shield Re-Proofer spray as a second treatment after using the wash in formula. This will build a secondary water repellent coating on garments used in very harsh/wet conditions.

    N.B The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing frequency. All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellence, due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric, then it is time to refresh with Re-proofer.

  • PROJECT GREEN

    Project Green is our never-ending commitment to deliver a multitude of environmentally-focussed improvements across our business. We love the planet we ride on, it’s our playground, and we’re driven to protect it for everyone.

    What are this products Project Green credentials?

    FORMULA

    PFC Free - not harmful to you or the environment.

    PACKAGING

    Fully recyclable aluminium bottle and cap. Bottle contains 50% PCR aluminium.

    APPAREL 

    Actively encouraging riders to look after their garments and help extend the life of them through correct washing and re-proofing, enabling it to perform at its best and keeping it out of landfill.

  • Frequently Asked Questions

    How many jackets/ garments can I treat per bottle?

    Depending on how much you use the 300ml/10.14oz bottle will treat around 3 garments (XL sized jackets) per bottle. 

    How long will the treatment last after application?

    The efficiency of the DWR applied to the surface of the technical apparel will gradually wear off over time with normal wear and washing, so we recommend refreshing the coating every 3 months depending on wear and washing.  All waterproof clothing needs to be cared for to keep it performing at its best. Using ordinary household detergent will ultimately break down the DWR and impair the water repellent due to the heavy surfactants in these products. If you notice that water is no longer beading on the surface of your garment and soaking into the fabric, then it is time to refresh with re-proofer.

    Can you use Wash-In Rain Shield Re-Proofer on normal clothes?

    The re-proofer will add a DWR coating to the fabric to provide some water resistance, but you cannot make non-waterproof fabric fully waterproof.

     

  • Reviews

  • Restore Waterproofing Back To Factory Levels

    The cutting-edge DWR treatment creates a tough barrier to keep your technical garments weatherproof, without impacting their breathability. It also helps to protect against mud and ground-in stains. And the best bit? It’s safe for the environment, as it’s water-based and doesn't contain PFCs!

  • Shake It To Activate It

    Use 100ml per large item (20 x 5ml caps) on a 30°C/86°F washing cycle for best results to help restore waterproofing performance on technical garments.